If you are keen on knowing different ways to improve your smile, you must have gone through these 3 names: Dental Veneers, Dental Crowns and Dental Bridges. What is the difference between these 3 techniques? All these three techniques are very effective for restoration of smile. Here we will brief you with the basics of these 3 important segments of cosmetic dentistry.

Dental Veneers

These are wafer thin shields to be placed on your teeth, made from ceramic material. When these are placed on the teeth, they can cover stains, blemishes, yellowness, uneven teeth, worn enamel, or gapped teeth. These veneers will solve a lot of your cosmetic dental problems. You can definitely opt for dental veneers if you have any of the following conditions


Difference of Dental Veneers Crowns and Bridges  www.identalhub.com

Worn Enamel: Enamel is the outer surface of your teeth. It might get worn out with age, and get discolored. It can also get worn out due to excessive drinking of coffee, or soda.
 
Wear and Tear: Wear and tear happens as you age, and your teeth get worn down.
 
Genetics: Some people have irregular spacing between their teeth, which gets worse with age.
 
These are a few examples where you can get corrected smiles using dental veneers

Dental Crowns

Dental Crowns envelop the complete tooth when compared to dental veneers that only cover the front surface of the tooth. These dental crowns can be made of ceramic, porcelain or metal. Dental Crowns provide extra support to the teeth. For badly damaged teeth, dental crowns could be an efficient treatment choice. The dental crown procedure makes use of tooth-shaped covers made of porcelain, ceramic or metal to restore vigor and remove uneasiness. Additionally, dental crowns might be used to envelop a dental implant or secure a dental bridge.

Difference of Dental Veneers Crowns and Bridges www.identalhub.com

Metal Crowns: These dental crowns are usually used for back teeth due to their metallic color. These dental crowns are excellent to provide support to poorly damaged back teeth. For Metal Dental Crowns, the most commonly used metals are: palladium, gold alloy, chromium alloy, and nickel alloy.

Ceramic Crowns: These dental ceramic crowns have a natural appearance and thus mostly used on front teeth. Most commonly used materials for these types of crowns are: resins, porcelain or dental ceramic.

Porcelain Crowns: These dental crowns are made of porcelain fused with a metal, and these are the strong and natural looking.

Dental Bridges

A dental bridge is made from 2 dental crowns for your teeth on each side of gap and the fake tooth between them. Dental implants, natural teeth, or a grouping of dental implants and natural teeth can be employed to hold the bridge. The type of dental bridge that you opt for depends on the state of your teeth, your budget, and the results you wish. Whether you look forward for a temporary or permanent tooth loss resolution, dental bridges are perfectly suited for your requirements.


Difference of Dental Veneers Crowns and Bridges www.identalhub.com

Types of Dental Bridges

Traditional Bridge: These dental bridges are the ones used most commonly and are prepared of PFM (Porcelain Fused Metal) or ceramic.
 
Cantilever Bridge: This Dental Bridge is used when teeth are only on single side of the gap.
 
Maryland Bonded Bridge: This Dental Bridge is made of plastic teeth supported by metallic structure.

You can decide on the type of cosmetic dental treatment you want, based on these specifications. Your choice depends up on your problem area and your budget. If you are looking for low budget options, you should opt for dental veneers. The most used types of dental veneers are the ones made from porcelain, although you can also go for resin veneers. These treatments do not have any bad impact on your teeth, and to get to know more about them, you can consult your dentist right away.

Leave Comment

Comments

  • Dr Aditi Salunkhe

    Dr Aditi Salunkhe 02 - January - 2012, at 10:46 AM

  • Nice

Free Dental Consultation